With over 25 years of experience our company has quality products that are necessary to help you with your projects. Browse our blog for information on the products we sell on our website, www.cablesupply.com. Our staff is available to answer questions. Feel free to give us a call with questions that you cannot find the answer to here! 800-774-6682 M-F 8:30AM - 5:00PM Pacific Time Zone.
Pallet shipping discounts are available! If you are ordering 10 or more of this product, please call 760-945-9000 or send an e-mail to sales@cablesupply.com to get a shipping quote.
1000ft of white Category 3 bulk cable with a PVC jacket. This cable is used for voice transmissions and has a transfer speed of up to 10 MB/s.
1000 feet of cable in a pull box
High-performance voice communications cable
Designed for indoor installations
Excellent attenuation and crosstalk characteristics
Telco Cable, 25 P, w/ Amphenol Plugs, Male to Cut End
Industry-standard 25-pair Category 3 cable. 24 AWG wire with a male Amphenol / Telco style connector on one end. The other end is cut for terminating the wires to a block. Telecom cable or Amphenol cable is thick cable used for connecting multiple voice or data lines for LANs or telecommunications. This cable handles up to 25 data channels or phone lines. Available in 5 ft, 10 ft, 15 ft, and 25 ft.
Notes: This product requires 2-3 days of lead time before shipment. It ships by UPS only, and cannot be shipped through the post office.
Telco Cable, 25 Pair with Amphenol Plugs, Male to Male
The Telco Cable, 25 Pair with Amphenol Plugs, Male to Male is an Industry-standard 25-pair Category 3 cable, 24 AWG wire. Comes with a male Amphenol / Telco style connector on either end and is used in telephone systems. The ends use 25 pairs of polarized pins, 50 pins total. This cable handles up to 25 data channels or phone lines. Available in 10 ft, 20 ft, 25 ft, 30 ft, and 50 ft.
Cable Runway Radius Outside Bend - An outside bend helps cable transition from a ladder rack running horizontally to one running vertically without exceeding the minimum bend radius of cable.
All cable has a minimum bend radius which is generally 15 times the diameter of the cable. To help maintain this radius a Cable Runway Radius Outside Bend can be installed when cable needs to make a horizontal to vertical transition. The Radius Outside Bend provides three rungs that carry the cable on the outside of its curve. Cable can be attached to the bend with Velcro and the bend can be attached to a ladder rack with a Butt-Splice Kit.
Made of lightweight 1-1/2” x 3/8” (38.1 mm x 9.53 mm) tubular steel
Three cross members welded at approximately 33 degree increments
Make smooth 90 degree lateral turns on ladder rack raceways while maintaining a proper cable bend radius.
This E-Bend for ladder racks allows cable to take 90 degree turns and keep its minimum bend radius. This 90 degree turn can be attached to a ladder rack with a Butt-Splice kit and the cable should be bundled with two-sided Velcro to not damage the cable.
Black powder coat finish
Made of lightweight 1-1/2 x 3/8 tubular steel to fit standard cable runway.
Shielded cable is becoming more and more common and necessary in many cabling situations. Shielded cable is able to protect the twisted pairs within its jacket to avoid alien crosstalk and Electromagnetic Interference (EMI) by two different means. The first thing that shielding does is it deflects much alien crosstalk with a foil jacket or with a braided jacket usually made of copper, tin, or aluminum or of a combination of these metals. This metal shield, like a foil hat to keep the government out of your thoughts, deflects electronic interference that can impede or destroy a signal on a cable. The second way that the metal shielding helps is it can absorb the potential electronic interferences; however, for this to be effectual the shield must be grounded properly otherwise the shield will only be able to deflect which is half of its job.
Secure cable wire and harness cable bundles quickly on the jobsite with this innovative and versatile Cable Tie. Southwire Cable Ties design eliminates the need to carry wire clamps, hose clamps, loop clamps and countless other items needed to get the job done.
Easily mount to standard surface w/ screw or nail without splitting the tie itself, using the evenly spaced pre-molded holes
Offered in 8", 11" and 14" lengths
Dual track locking feature
50 pound tensile strength
UV Resistant
2-4" Max Bundle
Molded from 6/6 Nylon
Resists temperatures ranging 32°F (0°C) to 185°F (85°C).
Available in 15 and 100 count packs, as well as assorted length packs.
Secure cable wire and harness cable bundles quickly on the jobsite with this innovative and versatile Cable Tie. Southwire Cable Ties design eliminates the need to carry wire clamps, hose clamps, loop clamps and countless other items needed to get the job done.
Easily mount to standard surface w/ screw or nail without splitting the tie itself, using the evenly spaced pre-molded holes
Offered in 8", 11" and 14" lengths
Dual track locking feature
50 pound tensile strength
UV Resistant
2-4" Max Bundle
Molded from 6/6 Nylon
Resists temperatures ranging 32°F (0°C) to 185°F (85°C).
Available in 15 and 100 count packs, as well as assorted length packs.
Patch Panels, 24 Port, 1U, Shielded, 19 inch are available in Cat6 and Cat6A is an unpopulated 24 port patch panel with 24 Cat6 shielded jacks. The jacks are thoroughly shielded and snap into place on the patch panel for ease of installation, punching down and replacement or relocation of individual ports. The ports alternately line up and feature a blank space for labeling.
The Cat6 version of this 24 port shielded patch panel features a grounding wire, two layers of shielding, clamps to hold cables in place, and 110 style punch down with 568A and 568B wiring guides.
19” 48 port 2U data shielded patch panel fits on a standard data rack. The cable punches down on a 110 punch down which has wiring guides for 568A and 568B. Available in Cat6 and Cat6a- comes with zip ties to cinch down each cable as well as grounding wire to ground entire panel to an external ground. Each cable is also cinched down with a metal clamp that screws onto the shielded and grounded Cat6 or Cat6a patch panel
This 12U Wall Mount Cabinet, Black from cable supply is a fully enclosed 19” rack mount cabinet system that provides easy operation and makes equipment mounting simple and quick. This Cabinet is built from super heavy duty 16 gauge steel, with a standard locking plexi-door that allows clear visibility of any inside devices. Cable supply only sells professional Cabinets built for intensive physical stress, to always ensure dependable operation for your applications.
Features
Sheet metal
Open and removable side panels
Tempered clear, lock and removable front door
Fixed mounting rail (2 pcs)
4 cable entries cut-off location with brush
2 fan cut-off spot (fan optional)
20pcs M6 screw and nuts
Powder coating
Overall Dimensions: 23.6”(W) x 25.25”(H) x 15.75”(D)
Wall Mountable Data Cabinet, 12U with 20-inch Depth
This 12U Wall Mount Cabinet, 20-inch Depth, Black from cable supply is a fully enclosed 19” rack mount cabinet system that provides easy operation and makes equipment mounting simple and quick. This Cabinet is built from super heavy duty 16 gauge steel, with a standard locking plexi-door that allows clear visibility of any inside devices. Cable supply only sells professional Cabinets built for intensive physical stress, to always ensure dependable operation for your applications.
Features
12U height, with fixed railing
Sheet metal, open and removable side panels
Tempered clear, lock and removable front door
Fixed mounting rail (4 pcs)
4 cable entries cut-off location with brush
2 fan cut-off spots (fan optional)
20 pcs M6 screw and nuts, powder coating
Overall Dimensions: 23.6W x 25.25H x 23.75D (inches)
Cat7 Computer Cable, Shielded 10G, 1000ft, PVC, Grey, Bulk Quantities - Item Detail: Bulk 1000ft Ethernet cable Category 7 shielded with a PVC jacket. This is computer cable capable of 10-Gigabit speed and can be used for voice, data, or video transmission. The PVC jacket has sequential foot markers.
Pallet shipping discounts are available! If you are ordering 10 or more of this product, please call 760-945-9000 or send an e-mail to sales@cablesupply.com to get a shipping quote.
1000 feet of bulk Ethernet cable on a wooden spool
4 Pair / 8 Conductor SSTP, TC braid shielded
Overall Tin-Copper Braid
23AWG Solid-Bare Copper Conductor
10GBASE-T Ethernet
1000BASE-Tx Gigabit Ethernet
10BASE-T, 100BASE-TX FAst Ethernet (IEEE 802.3)
10 VG - AnyLAN (IEEE802.12)
550 MHz Broadband Video
Voice, T1, ISDN
155/622 Mbps ATM
Suitable for 10G-750 MHz high speed data applications, Gigabit ethernet, fast ethernet and 155Mbps TP-PMD/CDDI
Designed for indoor installations (CM)
Excellent attenuation and crosstalk characteristics
1000 feet of shielded Cat.5E cable for outdoor use. This is computer cable that can be used for either voice or data transmission. Galvanized Steel Messenger Wire provides ideal support for aerial applications to reduce cable sag. Cat5e Shielded Outdoor CMX / Outside Plant (OSP) Cable with messenger cable and UV protected jackets. This cable is Shielded with Galvanized Steel Wire and is ideal for outdoors network installations.
High-performance data communications cable for noisy environments
Designed for outdoor installations, UV Jacket (CMX)
Excellent attenuation and crosstalk characteristics
Suitable for 350MHz high speed data applications, Gigabit ethernet, fast ethernet and 155Mbps TP-PMD/CDDI
Pallet shipping discounts are available! If you are ordering 10 or more of this product, please call 760-945-9000 or send an e-mail to sales@cablesupply.com to get a shipping quote.
RG-59 1000ft PVC Black 20AWG CCTV Shielded Coaxial Cable
RG59 20AWG bare copper coaxial cable for CCTV with 95% braid, 1000ft pull box, and black, PVC jacket.
Coaxial cable distribution of audio/video, radio frequency CATV-MATV, computer/data processing, and CCTV transmissions
RG-59U type coaxial cable
20AWG solid bare copper conductor for optimal signal transmission
95% braid coverage for optimal signal protection
Indoor cable application (non-conduit per NEC) for CCTV
CMX, UV Rated
Supplied in Pull Box
Pallet shipping discounts are available! If you are ordering 10 or more of this product, please call 760-945-9000 or send an e-mail to sales@cablesupply.com to get a shipping quote.
Shielded Cat5E, Cat6 Connector (internal ground), Includes an internal ground and a shielded housing to protect from EMI and high levels of noise interference. EZ-RJ45 Shielded Cat5e/6 Connectors - Platinum Tools is perfect for Military, hospitals, manufacturing plants, broadcast studios, casinos, and other industries that require shielded network systems.
A lot of Cat6a cables are standardly being made with shielding now. It is possible to terminate a shielded Cat6a cable to a mod plug that isn’t shielded but then grounding becomes an issue as well as the threats of EMI that a non-shielded mod plug does not provide. Platinum Tools’ 10G Cat6a modular plugs are shielded and also provide an external ground to attach the grounding drain wire within the cable. To properly terminate a shielded cable to these shielded mod plug the Tele-TitanXG is recommended.
RJ45 keystone are 8P8C (8 position 8 connection) jacks that can snap into a faceplate so that an RJ45 mod plug can be plugged into them. They are punched down using a 110 blade on a punch down tool in either the A pattern or the B pattern. Either A or B pattern can be used as long as the pattern on one end of the cable matches the pattern on the opposite end of the cable, though the B pattern is most popular in commercial use. CableSupply.com carries RJ45 keystone jacks that come in Cat5e, Cat6, or Cat6a. It is important to use the appropriate jack with the correlating cable; if a Cat5e jack were used on a Cat6 cable the connection would still work, however, the capabilities would be that of the lowest capabilities of the hardware. For example: a Cat5e Ethernet cable on a Cat6 jack would bring it to the capabilities of a Cat5e jack.
When stripping a cable to be punched down on a RJ45 jack, be sure to pull on the string within the cable to expose new cable that has not been potentially nicked by the data scissors or cable stripper. Next you will untwist the pairs and match up the wires to the color code printed on the side of the RJ45 keystone jack, either color code A or color code B. Don’t untwist the pairs too much because the twist in the pairs helps protect against alien crosstalk. Make sure that the color code on both ends of the cable match or there will not be a proper connection. There is a plastic cover that protects the exposed cables from dust and from being pulled out that can snap on top of the punched down cables. The RJ45 keystone jack can snap into a faceplate that can then be screwed into a P-ring, or plaster ring, on a wall. Keystone jacks also fit perfectly into surface mount boxes as well as unpopulated patch panels.
Type: Snap-in Keystone Jack (8P8C)
Category 5E, Category 6, or Category 6A
Termination: 110 Style 90 Degree punch down for 22-26 AWG solid wire
Use With: Any Computer Cable Store Blank Wall Plate or Patch Panel
At CableSupply.com we only offer the best and most essential tools on the market for network cabling. Dressing cable can be frustrating and time consuming but The Cable Comb can organize and dress your cables keeping them straight without any hassle.
The Cable Comb has 15 cable slots which can hold multiple cables, accommodating up to 24 to 30 cables regardless of the Ethernet cable lengths. It can hold a wide variety of cables, including most Cat5E, Cat6, Cat6A, Cat7, coaxial, and control cable in sizes of 1/4 inch or smaller. The Cable Comb's slick, nylon surface will provides a smooth pull without snagging, stretching, or stripping any of your cables.
Separating from The Cable Comb's blue center ring, the yellow slotted hub is easy to maneuver. Simply push your cables into the slots of the center hub, thread the yellow ring around the cable bundle, and then slide the ring back into place around the blue hub. The yellow ring only pulls off in one direction; if you pull in the other direction the entire unit stays together, holding your cable in place and straightening it all out into a neat bundle.
As you work down the length you can wrap your cable bundle with Velcro or use CableSupply.com cable ties. If you need to route a few cables elsewhere, just pull the outer ring off, remove your diverting cables, and then replace the ring to finish straightening the load.
Instructions:
Arrange your cables for bundling.
Remove the blue hub from the yellow outer collar of the Cable Comb. Hold the blue hub perpendicular to your cables - make sure the rounded finger pull of the pie-shaped protrusion is facing away from the direction you'll be pulling in.
Load the individual cables into the various slots of the blue hub on the Cable Comb. (How many cables each slot can hold depends on the type of cable being combed.) Do not overload a slot with cables. Cables in each slot must remain loose after you re-attach the outer collar.
Once the cables are loaded in the blue hub of the Cable Comb, slip the yellow collar over the cables behind the blue hub.
Rotate the collar to align the pie-shaped protrusion of the hub to the opening on the collar. Slide the collar onto the hub. (If the fit is too tight, it means one or more of your slots is overloaded. Remove the collar, redistribute your cables in the hub, then put the collar back on and test the fit again.)
Begin sliding the assembled Cable Comb (hub + collar) down the length of your cables. The cables emerge from the comb in a smooth, organized bundle.
Wrap the combed bundle with Velcro, tie wrap, or equivalent cable lash every 2 to 3 feet as desired to keep the cables organized and together. Continue the combing process to provide bundle lengths as required for the installation.
If necessary, disengage the yellow collar from the blue hub to unload individual cables that need to be terminated or directed elsewhere. Slip the yellow collar back onto the blue hub to continue combing.
To remove the Cable Comb, slide the yellow collar backwards, off the blue hub, and remove it from your cable bundle. Unload remaining cables from the blue hub. If the cables aren't terminated, the Cable Comb may also be slid completely off the end of the remaining cables to remove the tool as a mated assembly.
Keep the inner blue hub mated with the yellow outer collar during storage to protect the slots and face of the tool from potential damage.
The Linebacker Cable "Y" Protector offered by CableSupply.com is the addition to the Linebacker Cable Protector needed to make either 45 or 90 degree intersections. Linebacker Cable "Y' Protector End Caps make the Linebacker Cable Protector a safe option for industrial, commercial, and AV cable protecting applications. Due to the versitility added by this Linebacker Cable Protector accessory, the Linebacker Cable "Y" Protector is a must have for any cable protection system.
From outdoor concerts to construction sites and everywhere in between, the Linebacker Cable Protector is the perfect solution for cable and hose protection. Built to withstand cars and trucks, this cable protector is the heavy duty answer for your cable protection needs. Make sure that you check out the Linebacker Cable Protector end caps so that you will have a smoothe transition between your cable protector and the ground.
•The perfect protection for cables and hoses of 1.3 inches in diameter and less • Patented connectors to join multiple units together • Made of polyurethane, the Linebacker Cable Protectors are an All-weather cable protector solution • Patented 5-bar tread surface for a safer traction in all weather conditions • Interconnectivity makes for easy setup and teardown
This Portable Power Distribution by Rialto is a portable power and data distribution product that brings technology safely from the wall to where you need it. Rialto transfers power and routes cables in a ‘safe to walk-on’, robust and low profile design (only 1/2” thick), is fit for any environment. Offered with 6 Power outlets with a 48" unit length and a 120" cord.
The Jack in the box comes complete with everything needed to assemble and install one Cat. 5E or Cat. 6 data jack. The kit comes with:
Choice of 50,100,150 or 300 ft Ethernet cable
2 RJ45 jacks
1 Keystone biscuit
1 Keystone faceplate
1 drywall bracket
2 modular plugs to allow for self crimping
1 inexpensive punch down tool
Use the drop-down menus to select the Ethernet category and the length of your cable. You can terminate the cable yourself, or request the cable to be terminated before we ship it out. To have the cable terminated by us, please use the Accessories tab and select which type of jack (female ends) or modular plugs (male ends) you prefer at an additional labor cost.
Secure cable wire and harness cable bundles quickly on the jobsite with this innovative and versatile Cable Tie. Southwire Cable Ties design eliminates the need to carry wire clamps, hose clamps, loop clamps and countless other items needed to get the job done.
Easily mount to standard surface w/ screw or nail without splitting the tie itself, using the evenly spaced pre-molded holes
Offered in 8", 11" and 14" lengths
Dual track locking feature
50 pound tensile strength
UV Resistant
2-4" Max Bundle
Molded from 6/6 Nylon
Resists temperatures ranging 32°F (0°C) to 185°F (85°C).
Available in 15 and 100 count packs, as well as assorted length packs.
Secure cable wire and harness cable bundles quickly on the jobsite with this innovative and versatile Cable Tie. Southwire Cable Ties design eliminates the need to carry wire clamps, hose clamps, loop clamps and countless other items needed to get the job done.
Easily mount to standard surface w/ screw or nail without splitting the tie itself, using the evenly spaced pre-molded holes
Offered in 8", 11" and 14" lengths
Dual track locking feature
50 pound tensile strength
UV Resistant
2-4" Max Bundle
Molded from 6/6 Nylon
Resists temperatures ranging 32°F (0°C) to 185°F (85°C).
Available in 15 and 100 count packs, as well as assorted length packs.
Pallet shipping discounts are available! If you are ordering 10 or more of this product, please call 760-945-9000 or send an e-mail to sales@cablesupply.com to get a shipping quote. Thanks for viewing!
Cat6 Cable, 1000ft, Plenum Solid, Bulk Quantities - Itme Detail: 1000ft of blue Category 6 solid bulk cable with a fire-rated jacket. This is computer cable that can be used for voice, data, or video transmission. 4-pair unshielded twisted pair with spline. The jacket has sequential foot markers. 600MHz, Verified compliant with EIA/TIA standards by UL and ETL.
High-performance data communications cable for noisy environment
Suitable for up to 600MHz high-speed data applications
Gigabit ethernet, fast ethernet and 155Mbps TP-PMD/CDDI
Designed for indoor installations
Excellent attenuation and crosstalk characteristics
These brush cover access plates replace the solid plates on secure or convertible vertical data racks. (Plates are located on the sides, top, and underside of each rack.) With these plates, you can quickly add or remove patch cables and power cords while the brush covering inhibits airflow and prevents dust from entering the rack.
Includes two plates and mounting hardware. Takes only a few minutes to install and the only required tool is a Phillips screwdriver. Works with all secure and convertible vertical rack models.
Floor Mount Stand for Vertical Data Racks - Available @ cablesupply.com
The Floor Mount Stand for Vertical Data Racks from cable supply allows you to bolt your data rack to the floor when there is no solid wall available that can hold a vertical data rack. This stand accommodates convertible and secure vertical data racks, both standard compact models and tall models. Get your today at the the best price only from cable supply.
>> Buy Floor Mount Stand for Vertical Data Racks
These Secure Vertical Data Rack - Part # MRQ351S10 is a must have for any IT professional. These vertical data racks mount to a wall and store your equipment in a vertical configuration, saving you much more space than a traditional rack. The "Secure" style features a 4.5" deep backplate, side panels, vented bottom panel, front panel, and a locking lid. (It's the same as a convertible rack model with a secure upgrade kit.)
Secure vertical data racks are designed to fully enclose your equipment and protect it from tampering, theft, and vandalism. Vents in the bottom plate and the lid allow heat to escape from the inside.
Each rack is capable of holding 400 lbs of equipment. Secure racks come in "compact" and "tall" models. Compact racks can hold equipment up to 22" deep, and tall racks hold equipment up to 29" deep. On each model, 2U of vertical equipment space is inside the backplate and the rest is on the side panels. The internal 2U rails line up perfectly with the side panels, enabling installation of equipment that starts on the 2U internal rails and extends on to the side panels.
The upper section of the backplate features a 4U space dedicated for installation of up to 96 ports of patch panel hardware. Three pairs of removal access plates on the top, bottom, and lower sides of the backplate can be used for routing of large data cable bundles or routing of power cables. An integrated level and grounding lug assures that a single technician can quickly and accurately install the rack and properly ground all installed equipment.
This rack is modular and ships via UPS, eliminating the need for a costly liftgate or forklift at the delivery site.
Secure, enclosed configuration with back, side panels, bottom, and locking lid (key included)
Rack unit space for vertically mounted equipment: 6U, 8U, 10U, or 12U
Dedicated patch panel space at top of backplate: 4U
Vertical data racks mount to a wall and store your equipment in a vertical configuration, saving you much more space than a traditional rack. The "Convertible" style features a 4.5" deep backplate. The 2U model is just the backplate, which has rails inside the backplate. All other convertible models come with 2 side panels.
Unlike open-style rack models, convertible rack models can be upgraded to a secure, locking enclosure with an upgrade kit. Convertible models are ideal if you don't need security now, but want the ability to upgrade in the future.
Each rack is capable of holding over 400 lbs. of equipment mounted in a vertical orientation. The upper section of the backplate features a 4U space dedicated for installation of up to 96 ports of patch panel hardware. Three pairs of removal access plates on the top, bottom, and lower sides of the backplate can be used for routing of large data cable bundles or routing of power cables. An integrated level and grounding lug assures that a single technician can quickly & accurately install the rack and properly ground all installed equipment.
Convertible racks are available as "Compact" or "Tall" models. Compact models can hold equipment that's up to 22" long. Tall models hold equipment up to 29" long.
This product is modular and ships via UPS, eliminating the need for a costly liftgate or forklift at the delivery site.
Space for vertically mounted equipment: 2U, 6U, 8U, 10U, and 12U (2U are internal to the backplate)
Dedicated patch panel space at top of backplate: 4U
This vertical data rack mounts to a wall and you can store your equipment in a vertical configuration, saving you much more space than a traditional rack. The "Open" style includes a 2.5" deep backplate and 2 side panels. The bottom is left open so it can accommodate equipment without any length/depth restrictions.
The upper section of the backplate features a 2U space dedicated for installation of up to 48 ports of patch panel hardware. The side panels are capable of holding over 400 lbs. of equipment mounted in a vertical orientation.
Two circular holes on the top of the backplate can be used for data cable routing, power cable routing or conduit routing. An integrated level and grounding lug assures that a single technician can quickly and accurately install the rack and properly ground all installed equipment.
Open configuration with 2.5" deep backplate and 2 side panels
Rack unit space for vertically mounted equipment: 4U, 6U, 8U, or 10U
Dedicated patch panel space at top of backplate: 2U
Security Upgrade Kit for Convertible Vertical Data Racks
Security Upgrade Kit for Convertible Vertical Data Racks #MRQ351UPG10
Cable supply knows you must be tired of that antiquated data rack for you advanced data room. Why not upgrade your convertible data rack to a secure rack without removing any equipment or hardware! This Security Upgrade Kit for Convertible Vertical Data Racks includes a front panel, locking lid, and vented bottom panel to fully enclose your equipment and protect it from tampering.
Choose the depth of your data rack in rack units (6U, 8U, 10U, or 12U) and the height (compact or tall).
CAT5E 25 Pair, standard gray indoor feeder cable. The solid core copper cable is applicable for Gigabit Ethernet, 1000baseT. Brightly color coded for easy identification when punching down onto a 66 block. With 50 conductors this twisted pair feeder has tighter twists than cat3 cable and is ½ inch diameter. The cable comes in spools of 1,000 feet on a wooden spool.
Telco Cable, 25 Pair with Amphenol Plugs, Male to Male
The Telco Cable, 25 Pair with Amphenol Plugs, Male to Male is an Industry-standard 25-pair Category 3 cable, 24 AWG wire. Comes with a male Amphenol / Telco style connector on either end and is used in telephone systems. The ends use 25 pairs of polarized pins, 50 pins total. This cable handles up to 25 data channels or phone lines. Available in 10 ft, 20 ft, 25 ft, 30 ft, and 50 ft.
Telco Cable, 25 Pair with Amphenol Plugs, Male to Cut End
Industry-standard 25-pair Category 3 cable. 24 AWG wire with a male Amphenol / Telco style connector on one end. The other end is cut for terminating the wires to a block. Telecom cable or Amphenol cable is thick cable used for connecting multiple voice or data lines for LANs or telecommunications. This cable handles up to 25 data channels or phone lines. Available in 5 ft, 10 ft, 15 ft, and 25 ft.
Notes: This product requires 2-3 days of lead time before shipment. It ships by UPS only, and cannot be shipped through the post office.