Thursday, May 5, 2016

TV Box Recessed Outlet Multi-Gang (Wall Plate Kit) 2-Gang, White, 1-Pack

 

Arlington TVBU505-1 TV Box (Recessed Outlet Wall Plate Kit)

2-Gang, White, 1-Pack
Adjust to fit 1/4-Inch to 1-1/2-Inch wall board, paneling or drywall. Recessed bracket sits behind the wall to help you hide wires. Designed for Power/ Low voltage wiring. Perfect for LCDS in 2-gang unit. Includes paintable trim plate. Wing design provides secure mounting of bracket as screw is tightened.
This recessed TV box is specifically designed for helping organize wires for TVs and stereos. Most electrical boxes are made for low voltage, or high voltage, but this box has both! It allows you to mount LCD and plasma TV's flush against the wall. It provides a secure installation, with good looks. The textured trim plate is included and paintable to cover edges of cut drywall. It uses sturdy wing mounts that automatically flip into place to tighten to the wall. it can be used with walls up to 1-1/2-inch thick. There's no wobble once the box is installed. Arlington fittings are carefully inspected and our manufacturing process is designed to prevent the possibility of a defective product leaving our plant.
>> Purchase at www.cablesupply.com

The Complete Line of Jameson Buddy Rodders

The Complete Line of Buddy Rodders available at CableSupply.com

Buddy® System of Fiberglass Conduit Rodders

With Jameson’s comprehensive line of rodders, there is a Buddy to help you handle any job from running long distance copper, coax or fiber optic cable to pushing a sonde through conduit or pipe.

The Fiberglass Advantage

◾High visibility polymer sheath protects against rod abrasion and reduce friction

◾Round, flexible rod slides easily over wires in occupied conduit

◾Exceptional bending strength for maneuvering tight turns

◾Non-conductive and will not kink


>> Easy Buddy®

◾1/4” OD Fiberglass Rod ◾Rod or fish conduit 1" to 2"

◾Designed to handle tight turns and long runs

◾More flexible and smaller than Good Buddy®

◾Rod or fish conduit in buildings

◾4” Bending Radius

◾400-lb Pull/Tensile Strength

◾Rod is marked in 5' increments

◾Drag brake to control payout

◾Includes End Ferrule and Pulling Eye

◾Accessory Kit sold separately

◾Dimensions: 36.25" x 24” x 13” Good Buddy® Rodders

◾3/8” OD Fiberglass Rod ◾Rod or fish conduit 2" to 4"

◾Manhole-to-riser, riser-to-riser, cable vaults, large conduit

◾7” Bending Radius

◾1,000-lb Pull/Tensile Strength

◾Rod is marked in 5' increments

◾300' and 400' lengths

◾Folds to 10" width for carrying into manholes

◾Reel can be detached from frame

◾Frame handle for easy transport

◾Friction brake and safety roller feed

◾Operates vertically or horizontally

◾Dimensions: 29" x 29” x 27” (Fold to 10" Width)


>> Good Buddy® Rodders

◾3/8” OD Fiberglass Rod

◾Rod or fish conduit 2" to 4"

◾Manhole-to-riser, riser-to-riser, cable vaults, large conduit

◾7” Bending Radius ◾1,000-lb Pull/Tensile Strength

◾Rod is marked in 5' increments

◾Accessory Kit, End Ferrule and Pulling Eye Included in Good Buddy®

Detach or fold frame for transport into confined areas

◾300' and 400' lengths

◾Folds to 10" width for carrying into manholes

◾Reel can be detached from frame

◾Frame handle for easy transport

◾Friction brake and safety roller feed

◾Operates vertically or horizontally

◾Dimensions: 29" x 29” x 27” (Fold to 10" Width)


>> Good Buddy® II

Increased rod length for longer runs

◾400', 500', and 600' lengths

◾Oversized wheels support weight of longer rod

◾Frame handle and wheels for transport

◾Friction brake and safety roller feed

◾Operates vertically or horizontally

◾Dimensions: 39" x 32” x 18”


>> Good Buddy® III

Smaller frame for maximum portability

◾300' and 400' lengths

◾Wheels and frame handle for transport

◾Smaller frame size than GB or GBII

◾Friction brake and safety roller feed

◾Operates vertically or horizontally

◾Dimensions: 32" x 28” x 13” Big Buddy® Big Buddy®

◾1/2” OD Fiberglass Rod

◾Rod or fish conduit of 4" or larger

◾Manhole-to-manhole or long run cable pulls

◾10" bend radius ◾1,000-lb Pull/Tensile Strength

◾1/2" rod is rigid enough to push any size sonde into any diameter pipe over 4"

◾Fully portable, transports in small van

◾Operates vertically or horizontally

◾Rod is marked in 5' increments

◾Drag brake and safety feed to control payout

◾Includes End Ferrule and Pulling Eye

◾Repair Kit sold separately

◾Dimensions: 47.5" x 44” x 20”


>> Big Buddy®

◾1/2” OD Fiberglass Rod

◾Rod or fish conduit of 4" or larger

◾Manhole-to-manhole or long run cable pulls

◾10" bend radius

◾1,000-lb Pull/Tensile Strength

◾1/2" rod is rigid enough to push any size sonde into any diameter pipe over 4"

◾Fully portable, transports in small van

◾Operates vertically or horizontally

◾Rod is marked in 5' increments

◾Drag brake and safety feed to control payout

◾Includes End Ferrule and Pulling Eye

◾Repair Kit sold separately

◾Dimensions: 47.5" x 44” x 20”