SecureMount Anchors for Flat Panel TVs
>> Buy SecureMount Anchors for Flat Panel TVs @ cablesupply.com
The Vanco SecureMount anchors for flat panel TVs are secure and easy to install. To mount just create a 1.25” hole in the wall, the same size as the anchor mount. Next put the guide into the hole and push the anchor through until it is completely behind the wall then just pull it tight. The ratcheting teeth will keep it secure. Each package comes with two anchors and it is recommended to use two anchors on each end of the TV mount.
- No stud required
- D-shaped anchors provide optimal bracing behind the wall, allowing for quick installation into 1/2" - 1 1/4" drywall (compatible with back-to-back 5/8" drywall)
- Secure mount hardware requires a 3.5" deep clear space behind the wall
- Anchors: 3.75" L x 1" W
- Product weight: 11 oz per pair
- Limited lifetime warranty
- UL recognized component
- Parts included per pair: (2) SecureMount™ anchors, (2) guide sleeves, (1) pull tab, (2) anchor screws M6 x 50mm long
Note: This product is designed for use with fixed or tilt mounts only. SecureMount™ anchors cannot be used when installing articulating, pivoting or swivel wall mounts.
No comments:
Post a Comment