Wall Mount Bus Bar Kit
Use to ground and isolate electrical currents.
10'' x 4'' or 20'' x 4'' copper grounding bar
Required mounting hardware
>> Buy Wall Mount Bus Bar Kit
Use to ground and isolate electrical currents.
10'' x 4'' or 20'' x 4'' copper grounding bar
Required mounting hardware
1.5" x 12" x 119.50"
Tubular steel (strong but light)
Standard length, 9' 11-1/2''
Standard cross member position every 12''
compatible with other runway systems
Steel triangle wall support bracket. Includes pre-drilled triangular bracket for wall support on a cable runway, two J-bolts, and all needed hardware.
Wall Angle Supports offer needed wall support for cable runways.
-Pre-drilled steel wall angle plate
-Required Hardware for installation
The termination Kits available come in the 12'' Runway and the 18'' Runway. Both sizes of the Termination kits are for closing unspliced ends of cable runways.
-Comes in both 12'' Runway and 18'' Runway
-Two Junction-T brackets
-One piece of 1.5'' tube
-All required installation hardware
This is a Junction-Swivel Splice Kit. It has the ability to run horizontally, vertically, or perpendicularly to the cable runways. it's adjustable to a variety of angles and comes with two brackets. Hardware is also included with this product.
Featuring a large 20 inch by 10 inch main pouch with 16 smaller pockets throughout there’s a place for every tool in Greenlee’s electrician canvas tool bag. This heavy-duty tool bag has a leather reinforced bottom to help support all the tools this bag can carry as well as protects the bottom from damage. The large mouth opening has a hinged steel frame to help retain bag shape and create a large and easy access to all your tools. Buckles across the opening help keep the main pouch closed to avoid losing anything in transport.
This heavy duty nylon bag from Greenlee features an amazing 31 pockets including additional elastic straps on the outside for holding hammers or levels or any other larger tool. Because this bag has the capability to hold so many tools the wrap around handles are reinforced and the bag also comes with a removable and padded shoulder strap. Zipper protected main pocket is steel framed to reinforce the shape of the bag and makes for easy access to the large pocket.
Cordura® is a tough but lightweight fabric that can hold up against a good deal of punishment, so Greenlee gave this bag two layers of it just to be sure. The box design of Greenlee’s rugged Open Tool Carrier makes all the large tools in the main pocket easy to find and with an additional 37 pockets and loops there is no shortage of areas to keep tools and supplies organized. Stress points are reinforced with rivets and the bottom is sturdy and padded with rubber.
Manufacturing Number: 0158-13
Greenlee 16" Tool Carrier with Parts Bin 0158-19 - Item Detail: Greenlee’s Tool Carrier with Parts Bin is an open tool box design with two main pockets, 15 additional pockets, web loops in main pockets for larger tools, and a plastic parts bin kept in the middle pocket to organize smaller parts like screws, connectors, nuts, and bolts. The fabric Tool Carrier has a steel reinforced frame and has comfortable carrier handles and a removable padded shoulder strap.
A heavy duty canvas pouch perfect for holding smaller items. Keep it in your tool bag to keep your small and easy to lose items in one easy to find place. This pouch by Greenlee is made out of strong canvas with a sturdy zipper to keep items secure. This canvas zipper bag is 12 inches long and 7 inches high.>> Buy Greenlee 12" Canvas Zipper Bag 0158-14
Cable Supply offers this amazing new Vanco HDMI Inline Coupler. The design is sleeker and we believe that you won't find a better one out there. Use the HDMI® inline coupler to join two HDMI® cables into a single-longer length. This coupler houses two 19-pin HDMI® female jacks.
19” 48 port 2U data shielded patch panel fits on a standard data rack. The cable punches down on a 110 punch down which has wiring guides for 568A and 568B. Available in Cat6 and Cat6a- comes with zip ties to cinch down each cable as well as grounding wire to ground entire panel to an external ground. Each cable is also cinched down with a metal clamp that screws onto the shielded and grounded Cat6 or Cat6a patch panel>> Buy Patch Panel 48 Port, Shielded
Black aluminum relay rack. 84" x 19", 45U. 19" is an open single frame with 10-24 thread. This relay rack is the standard sized rack and is easy to assemble. The standard 19” width can hold switches, routers, racks, and patch panels. Wire management can be mounted on the sides or horizontally to keep patch cords looking clean and organized.>> Buy Black Aluminum Relay Rack, 84 x 19 inches, 45U
The Vertical Slotted Cable Manager - Double Sided from cable supply provides vertical cable management on the side of a network rack. This is a 7-foot tall Finger Duct Style Cable Management solution that features slotted ducts designed to allow cables to be routed at as required for patch panels, switches, servers or any rack mounted equipment you can purchase at cable supply. The Vertical Slotted Cable Manager - Double Sided includes removable covers and mounting screws.>> Buy Vertical Double Sided Cable Manager
Great for supporting cable from wall to two post equipment rack.
Greenlee Part #: GT-16
• CAT IV rated optical cable for troubleshooting around energized circuits
• Inspect near energized circuits with 4' (1.2m) CAT IV 600V; CAT III 1000V Optical Cable
• Water tight optical cable for submerged inspections
• Built-in memory for capturing over 2000 pictures
• Image download capability & RCA video output
• 180 degree image rotation for easy viewing
• Includes: Handheld Display Unit
• 4' (1.2m) CAT IV 600V; CAT III 1000V Optical Cable
• 4 AA Batteries
• USB Cable - for download pictures
• Hook, Magnet, and Mirror Tip Accessories
• Rugged Carrying Case
Greenlee FishFinder Vision System Data Sheet:
Greenlee FishFinder Vision System PDF
Perfect for wire management applications, Dolphin cable tie mounts have 4-way entry and a self-adhesive backing to help hold in place until further securing with a screw. Once secure, just thread your cable tie through, zip it shut around the cable and your all set!
These Cable Tie Mounts are sometimes called "cable buttons" in the cabling industry. They create a permanent, efficient way of attaching nylon zip ties to a wall or other surface for holding various types of cables.
Each button has adhesive on the back and a screw hole in the center. Use the adhesive to temporarily stick the cable button to a surface and hold it in place while you drive a screw through the center to permanently secure it.
There are 4 slots in the button surface - 2 pairs running in perpendicular directions. These buttons are versatile and allow you to change up your configuration in the future.
Dolphin Cable Tie Adhesive 1 X 1 Four Way Spec Sheet:
Dolphin Cable Tie Adhesive 1 X 1 Four Way PDF
Video:>> Buy Cable Tie Mounts from Dolphin at CableSupply.com
LED Lights are sold in packs of 24 and can be used with CableSupply.com's Cable Identifier. Save time and money by using this latest method of identifying ports in your patch panel and jacks. These LEDs can be used to identify ports on a Cat5e patch panel or Cat6 patch panel. Check out the video below to see how it all works! Buy these lights separately or as a combo with the Cable Identifier!
Label Refills Tube (0-9) White contains 10 tangle free label spools; 76 labels in total with 760 Markers.
These labels are great for legibly and quickly labeling Cat5e, Cat6, Cat7, coaxial,fiber optic, patch cords, or any kind of wire or cable.
Item Detail: The user friendly Wire Marking System is portable and easy to use. To apply a label to a Cat5e, Cat6, Cat7, coaxial, fiber optic, or any other kind of cable simply pull down on a strip labeled 0-9 to automatically eject label for easy application! Our Wire Marking System is portable enough to fit into your shirt pocket or attached to a tool belt yet efficiently gets the job done legibly and hassle free. Each dispenser contains 760 individual markers with ten different legends precut 1/4" W x 1 1/4"L.
Pallet shipping discounts are available! If you are ordering 10 or more of this product, please call 760-945-9000 or send an e-mail to firstname.lastname@example.org to get a shipping quote.>> Buy Cat3 Cable, 1000 feet, PVC, White 2-pair
1000ft of white Category 3 bulk cable with a PVC jacket. This cable is used for voice transmissions and has a transfer speed of up to 10 MB/s.
|Conductor||Solid bare copper|
|Conductor Size||24 AWG|
|Insulation Thickness||0.203 mm|
|Outer Diameter||4.51 mm ± 0.2 mm|
|Impedance||100Ω ± 15%|
|Core DC Resistance||98 (Ω/km)|
|DC Resistance Unbalance||≤ 2.0%|
|Frequency||Attenuation (dB/100m)||Next (dB)||Skew (ns)||Delay (ns/100m)|
Industry-standard 25-pair Category 3 cable. 24 AWG wire with a male Amphenol / Telco style connector on one end. The other end is cut for terminating the wires to a block. Telecom cable or Amphenol cable is thick cable used for connecting multiple voice or data lines for LANs or telecommunications. This cable handles up to 25 data channels or phone lines. Available in 5 ft, 10 ft, 15 ft, and 25 ft.
Notes: This product requires 2-3 days of lead time before shipment. It ships by UPS only, and cannot be shipped through the post office.>> Buy Telco Cable, 25 Pair with Amphenol Plugs, Male to Cut End
The Telco Cable, 25 Pair with Amphenol Plugs, Male to Male is an Industry-standard 25-pair Category 3 cable, 24 AWG wire. Comes with a male Amphenol / Telco style connector on either end and is used in telephone systems. The ends use 25 pairs of polarized pins, 50 pins total. This cable handles up to 25 data channels or phone lines. Available in 10 ft, 20 ft, 25 ft, 30 ft, and 50 ft.
Item Detail: 1000 feet of single-pair cross-connect wire. 24 gauge. Used to complete lines on a 66 block. Cross connect cable is used to connect pins on a 66 block to each other and is essentially the same thing as a single pair of wire within an Ethernet cable. Whether a cat5e, cat6, or 25 pair cable is punched down to a 66 block the connection ends on that pin unless a cross connect cable is punched down to the corresponding pins to another 66 block or to another pin on the same 66 block, this is called “daisy chaining”. Daisy chaining is using one pair of cross connect cable on a 66 block that is punched down with the non-cutting side of a punch down tool blade.
Most voice and data network problems are wire related. Open or shorted pairs and general mis-wires are quickly diagnosed with the 468 Modular Cable Tester. Tester features a built-in tone generator; connect any 8-position modular plug to the appropriate jack on the transmitter, and a sweeping-tone signal is applied to all pairs. At the far end of the cable, use any 200-Series Inductive Amplifier to locate the corresponding plug or jack. Connecting the receiver unit automatically activates the test process. Sequencing red and green LEDs provide fast, accurate and easy to understand results. The Model 468 Tester identifies open and short circuits, reversed and transposed pairs and alerts if connected to an active circuit, without harming the unit.
• Test 258, T568A, T568B, 10Base-T, USOC standards
• Identify open, short, reversed and transposed pairs
• Send tone to identify cable at remote
Power: One 9V battery, nominal life 2000 hrs (no load)
Tone frequency: 850 and 950 Hz alternating nominal
Tone output: 9V p-p open circuit
Voltage protection: Transmitter, 52 VDC 90V p-p (up to 10 minutes); receiver, 52 VDC momentary
High-impact ABS cases 7.5 oz (complete kit)>> Buy Modular Cable Tester @ CableSupply.com
Use a telephone line tester to thoroughly examine phone lines and ensure their integrity. This phone tester inspects the talk, ring, and monitor functions. It features switchable tones as well as a LED indicator that signals whether the wires' polarity is reversed. This tester is water-resistant, allowing for its use in all weather. It also includes a spade connector cord to test phone lines with blade receptacles. This top-notch tester will determine any irregularities that may be present.
Greenlee Part # 0159-11
The Workstation Installation Kit gives you the necessary tools for terminating twisted pair cable.
This all inclusive kit includes:
Size: 10.2" (L) x 7.9" (W) x 1.9" (H)>> Buy Patch Cable Termination Kit w/ Tester
Computer Crossover Cables are injection molded and booted to help protect the mod plug from damage and to help keep it from falling out of its port. Each crossover cable is fully tested and compliant with TIA/EIA computer standards. Use these crossover cords to connect two devices of the same type, such as two switches or routers.
A standard patch cord has the same wiring pattern on both sides of the cable; either 568A or 568B, this type of cable is used to connect a switch to a patch panel or a computer to a data jack. However if you needed to connect a PC to a PC or a router to a router you would have to use a crossover cable. The crossover cable has the 568A pattern on one end of the cable and the 568B pattern on the other end. The reason this is necessary is because two devices that do the same thing will send and receive information on the same exact pairs. If router A is sending information on pairs 4 and 5 and so is router B then the information will never be received by either end; it would be like traffic trying to go both ways on a one way street. To solve this problem the wires are rearranged so that the information can be sent and received simultaneously by both devices.
Category 5E: 350MHz, RJ45 (8 conductor)
Category 6: 550MHz, RJ45 (8 conductor)
Greenlee Part # 6186>> Buy Cable Caster
The 90-degree Junction Splice Kit for Ladder Rack is ideal for large data centers where installing a cable runway is a must. Easily attach the junction splice kit to side stringers of the cable runway to facilitate transitions in multiple directions.
4- Corner Clamp Latches
2- 3/8" x 3/8" Round-Head, Square-Neck Bolts
2- 3/8" Hex Nuts
2- Split Lock Washers
The Pull Elbow is a time-saving cabling tool for anyone who installs cable for voice, data, fiber optic networks, video, alarms, paging systems, access control, CATV, music, property or energy management systems. It allows you to pull cable around corners without catching, snagging, or kinking, and it has no moving parts to cut or pinch the cables. You can mount it with zip ties in seconds to help cable glide smoothly around corners or change direction along ceilings. Similar to pulleys, it allows you to keep the cables at ceiling level during the pull.
After the cables are secured in place, you can remove them from the Pull Elbow tool through a convenient slot running along the back, and the Pull Elbow can be taken down just as quickly as setup. Use cable ties at the ends of the guide tube to keep the cables inside during the pull. Simply cut them to remove the cables when finished.
The smooth inner surface that allows the cables to glide around corners, also preserves the integrity of the cable by ensuring that bends aren't sharper than the cables' "minimum bend radius" rating. By keeping the cables at ceiling level during the installation process, your customers are spared the hazard and inconvenience of having long lengths of cable laid out on the floor. The cable is thus protected from damage by keeping it up high and out of the way while being installed.